Skip header content and main navigationBinghamton University, State University of New York - ADL
Inkjet_printer

Inkjet printer Optomec M3D 300

Inkjet Printer
 

Inkjet Printer

  • Inkjet printing system M3D 300 from Optomec
  • Fine Features (~10 μm wide, ~10 nm thick)
    • Miniaturized electronics and active devices
    • Near monolayer films of active material
  • Large Standoff Distance (~5mm)
    • Non-contact, conformal printing
    • Minimized substrate breakage
    • 3D and Via-fill capability
  • Wide material compatibility
    • Ink viscosity 0.7-2500 cP
    • Conductors, Insulators, Semiconductors
    • Low temperature processing
  • High Throughput
    • Print speeds exceeding 100 mm/s
    • Multinozzle heads under development
  • Minimal Waste/Clean Technology
    • No post cleaning
    • No lithography
    • No etching

 

Reserve the tool

Instrument Owner: Larry Lehman

Binghamton University State University of New York
PO BOX 6000   Binghamton, NY 13902-6000

Last Updated: 7/29/14