Publications 2011

This listing was gathered through the University Library databases and is by no means exhaustive. If you know of a publication that is missing from the listing, please let us know and it will be added.

Abstracts and full pdfs may be found through the University Libraries website. Suggested databases are Engineering Viliage, PubMed, Science Direct and Web of Science, all found in the database listing under the Articles & Databases tab.

[last updated January 11, 2012]

 

Abitova, G., Beisenbi, M., & Nikulin, V. (2011). Design of modern monitoring systems for efficient control and management of technological processes. Paper presented at the Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2011, 7981. pp. 79814E (7 pp.). doi:10.1117/12.880220

Abitova, G., Beisenbi, M., & Nikulin, V. (2011). Complex automation of a technological process on the basis of control systems with a three level structure. Paper presented at the 2011 5th IEEE International Systems Conference, SysCon 2011, April 4, 2011 - April 7, pp. 34-37. doi:10.1109/SYSCON.2011.5929122

Albat, B., Almendral, J., Anders, R., Andrew, P. S., Arruda, M. S., Asirvatham, S. J., et al. (2011). Contributors. Cryoablation of cardiac arrhythmias (pp. vii-x). Saint Louis: W.B. Saunders. doi:10.1016/B978-1-4377-1615-3.00023-X

Almeanazel, O. T., Hamasha, M. M., Aqlan, F., Khasawneh, M. T., "A Study on the Effect of Smoking, Gender, and Hand Dominancy on Hand Grip Endurance Limit", International Journal on Intelligent Technologies and Engineering Systems, Vol. 1, No. 1, pp. 67-73, 2011.

Alsaleem, F., & Younis, M. I. (2011). Integrity analysis of electrically actuated resonators with delayed feedback controller. Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME, 133(3) doi:10.1115/1.4003262

Alzoubi, K., Hamasha, M. M., Lu, S., & Sammakia, B. (2011). Bending fatigue study of sputtered ITO on flexible substrate. IEEE/OSA Journal of Display Technology, 7(11), 593-600. doi:10.1109/JDT.2011.2151830

Alzoubi, K., Hamasha, M. M., Schadt, M., Lu, S., Sammakia, B., & Poliks, M. (2011). Effect of lamination on the bending fatigue life of copper coated PET substrate. Paper presented at the Advances in Display Technologies; and E-Papers and Flexible Displays, January 26, 2011 - January 27, 7956. pp. The Society of Photo-Optical Instrumentation Engineers (SPIE). doi:10.1117/12.874226

Alzoubi, K., Lu, S., Sammakia, B., & Poliks, M. (2011). Experimental and analytical studies on the high cycle fatigue of thin film metal on PET substrate for flexible electronics applications. IEEE Transactions on Components Packaging and Manufacturing Technology, 1(1), 43-51. doi:10.1109/TCPMT.2010.2100911

Alzoubi, K., Lu, S., Sammakia, B., & Poliks, M. (2011). Factor effect study for the high cyclic bending fatigue of thin films on PET substrate for flexible displays applications. Journal of Display Technology, 7(6), 348-355. doi:10.1109/JDT.2010.2076772

Aqlan, F., Hamasha, M. M., Almeanazel, O. T., Khasawneh, M. T., "Stochastic Analysis of Pull Production Systems", Journal of Management and Engineering Integration, Vol. 4, No. 1, pp. 36-44, 2011.

Arfaei, B., Tashtoush, T., Kim, N., Wentlent, L., Cotts, E., & Borgesen, P. (2011). Dependence of SnAgCu solder joint properties on solder microstructure. Paper presented at the 2011 61st Electronic Components and Technology Conference, ECTC 2011, May 31, 2011 - June 3, pp. 125-132. doi:10.1109/ECTC.2011.5898502

Barroso, J.J. & Hasar, U.C. (2011). Resolving phase ambiguity in the inverse problem of transmission /Reflection measurement methods. Journal of Infrared, Millimeter, and Terahertz Waves: 1-10.

Barsimantov, O., & Nikulin, V. V. (2011). Adaptive optimization of a free space laser communication system under dynamic link attenuation. Journal of Optical Communications and Networking, 3(3), 215-222. doi:10.1364/JOCN.3.000215

Batllori, R., Laramee, C.B., Land, W. & Schaffer, J.D. (2011). Evolving spiking neural networks for robot control. Procedia Computer Science, 6(0), 329-334.

Belohlavek, R., Sigmund, E., & Zacpal, J. (2011). Evaluation of IPAQ questionnaires supported by formal concept analysis. Information Sciences, 181(10), 1774-1786. doi:10.1016/j.ins.2010.04.011

Bhopte, S., Sammakia, B., Iyengar, M., & Schmidt, R. (2011). Numerical and experimental study of the effect of underfloor blockages on data center performance. Journal of Electronic Packaging, Transactions of the ASME, 133(1) doi:10.1115/1.4003603

Blass, D., Meilunas, M., & Borgesen, P. (2011). On the incorporation of fine pitch lead free CSPs in high reliability SnPb based microelectronics assemblies. IEEE Transactions on Components Packaging and Manufacturing Technology, 1(1), 92-99. doi:10.1109/TCPMT.2010.2099990

Borgesen, P., Yin, L., & Kondos, P. (2011). Assessing the risk of ''kirkendall voiding'' in Cu3Sn. Microelectronics Reliability, 51(4), 837-46. doi:10.1016/j.microrel.2010.11.014

Borgesen, P., & Meilunas, M. (2011). Effects of solder paste volume and reflow profiles on the thermal cycling performance of mixed SnAgCu/SnPb solder joints. IEEE Transactions on Components Packaging and Manufacturing Technology, 1(8), 1205-1213. doi:10.1109/TCPMT.2010.2101072

Borgesen, P., Yin, L., & Kondos, P. Acceleration of the growth of Cu3Sn voids in solder joints. Microelectronics Reliability, (0) doi:10.1016/j.microrel.2011.12.005

Borgesen, P., Yin, L., & Kondos, P. (2011). Assessing the risk of "kirkendall voiding" in cu(3)sn. Microelectronics Reliability, 51(4), 837-846. doi:10.1016/j.microrel.2010.11.014

Cai, N., Zhou, G., Muller, K., & Starr, D. E. (2011). Tuning the limiting thickness of a thin oxide layer on al (111) with oxygen gas pressure. Physical Review Letters, 107(3) doi:10.1103/PhysRevLett.107.035502

Chen, Y., Twigg, C. M., Sadik, O. A., & Tong, S. (2011). A self-powered adaptive wireless sensor network for wastewater treatment plants. Paper presented at the 2011 9th IEEE International Conference on Pervasive Computing and Communications Workshops, PERCOM Workshops 2011, March 21, 2011 - March 25, pp. 356-359. doi:10.1109/PERCOMW.2011.5766905

Chen, Y., Wang, C., Ku, W., & Su, Z. (2011). A location aware virtual infrastructure for VANETs. Paper presented at the 2011 IEEE Consumer Communications and Networking Conference, CCNC'2011, January 8, 2011 - January 11, pp. 820-821. doi:10.1109/CCNC.2011.5766611

Chennagiri, G., Iyer, S., & Srihari, K. (2011). Rework of lead-free area array packages assembled on ultrathin flexible substrates. IEEE Transactions on Components Packaging and Manufacturing Technology, 1(4), 611-621. doi:10.1109/TCPMT.2010.2101270

Chiarot, P. R., Sullivan, P., & Ben Mrad, R. (2011). An overview of electrospray applications in MEMS and microfluidic systems. Journal of Microelectromechanical Systems, 20(6), 1241-1249. doi:10.1109/JMEMS.2011.2168810

Ci, S., & Qiu, Q. (2011). Message from the ETMEC-2011 co-chairs. Proceedings - International Conference on Computer Communications and Networks, ICCCN, , IEEE Communications Society; U.S. National Science Foundation (NSF); Qualcomm; Microsoft Research; EiC. doi:10.1109/ICCCN.2011.6005736

Das, N. C., Yang, K., Liu, Y., Sokol, P. E., Wang, Z., & Wang, H. (2011). Quantitative characterization of vertically aligned multi-walled carbon nanotube arrays using small angle X-ray scattering. Journal of Nanoscience and Nanotechnology, 11(6), 4995-5000.

Dhakal, T., Yun, S., Tosado, J., Margankunte, N., & Biswas, A. (2011). LPCMO nano-templates grown using substrate induced strain. Materials Science and Engineering: B, 176(16), 1326-1328. doi:10.1016/j.mseb.2011.07.016

Duan, Z., Gopalan, K., & Yuan, X. (2011). An empirical study of behavioral characteristics of spammers: Findings and implications. Computer Communications, 34(14), 1764-1776. doi:10.1016/j.comcom.2011.03.015

Feng, J., Chen, Y., & Summerville, D. H. (2011). A fair multi-party non-repudiation scheme for storage clouds. Paper presented at the 2011 12th International Conference on Collaboration Technologies and Systems, CTS 2011, may 23, 2011 - may 27, pp. 457-465. doi:10.1109/CTS.2011.5928724

Feng, J., Chen, Y., Summerville, D., Ku, W., & Su, Z. (2011). Enhancing cloud storage security against roll-back attacks with a new fair multi-party non-repudiation protocol. Paper presented at the 2011 IEEE Consumer Communications and Networking Conference, CCNC'2011, January 8, 2011 - January 11, pp. 521-522. doi:10.1109/CCNC.2011.5766528

Filler, T., & Fridrich, J. (2011). Design of adaptive steganographic schemes for digital images. Paper presented at the Media Watermarking, Security, and Forensics III, 7880. pp. 78800F (14 pp.). doi:10.1117/12.872192

Filler, T., Judas, J., & Fridrich, J. (2011). Minimizing additive distortion in steganography using syndrome-trellis codes. IEEE Transactions on Information Forensics and Security, 6(3), 920-935. doi:10.1109/TIFS.2011.2134094

Filler, T., Pevny, T., Craver, S., & Ker, A. (2011). Lecture notes in computer science (including subseries lecture notes in artificial intelligence and lecture notes in bioinformatics): Preface. Lecture Notes in Computer Science (Including Subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 6958 LNCS, VI-VI. doi:10.1007/978-3-642-24178-9

Filler, T., & Fridrich, J. (2011). Design of adaptive steganographic schemes for digital images. Paper presented at the Media Watermarking, Security, and Forensics III, January 24, 2011 - January 26, 7880. pp. The Society for Imaging Science and Technology (IS and T); The Society of Photo-Optical Instrumentation Engineers (SPIE). doi:10.1117/12.872192

Filler, T., Judas, J., & Fridrich, J. (2011). Minimizing additive distortion in steganography using syndrome-trellis codes. IEEE Transactions on Information Forensics and Security, 6(3), 920-935. doi:10.1109/TIFS.2011.2134094

Fridrich, J., & Goljan, M. (2011). Determining approximate age of digital images using sensor defects. Paper presented at the Media Watermarking, Security, and Forensics III, January 24, 2011 - January 26, 7880. pp. The Society for Imaging Science and Technology (IS and T); The Society of Photo-Optical Instrumentation Engineers (SPIE). doi:10.1117/12.872198

Gallia, J., Tan-Wilson, A., & Madden P.H. (2011) Poster: De novo protein identification by dynamic programming. 2011 IEEE 1st International Conference on Computational Advances in Bio and Medical Sciences, ICCABS 2011: 242-243.

Garrett, S. K., & Khasawneh, M. T. (2011). Human factors and ergonomics in healthcare delivery: A special issue on health information technology and medication administration safety. International Journal of Industrial Ergonomics, 41(4), 333-335. doi:10.1016/j.ergon.2011.05.003

Ge, Y., & Qiu, Q. (2011). Dynamic thermal management for multimedia applications using machine learning. Paper presented at the 2011 48th ACM/EDAC/IEEE Design Automation Conference, DAC 2011, June 5, 2011 - June 9, pp. 95-100.

Goljan, M., Fridrich, J., & Chen, M. (2011). Defending against fingerprint-copy attack in sensor-based camera identification. IEEE Transactions on Information Forensics and Security, 6(1), 227-236. doi:10.1109/TIFS.2010.2099220

Hamasha, M. M., Alzoubi, K., & Lu, S. (2011). Behavior of sputtered indium-tin-oxide thin film on poly-ethylene terephthalate substrate under stretching. IEEE/OSA Journal of Display Technology, 7(8), 426-433. doi:10.1109/JDT.2011.2131634

Hamasha, M. M., Alzoubi, K., Lu, S., & Desu, S. B. (2011). Durability study on sputtered indium tin oxide thin film on poly ethylene terephthalate substrate. Thin Solid Films, 519(18), 6033-6038. doi:10.1016/j.tsf.2011.04.069

Hamasha, M. M., Alzoubi, K., Switzer III, J. C., Lu, S., Desu, S. B., & Poliks, M. (2011). A study on crack propagation and electrical resistance change of sputtered aluminum thin film on poly ethylene terephthalate substrate under stretching. Thin Solid Films, 519(22), 7918-7924. doi:10.1016/j.tsf.2011.06.062

Hamasha, M. M., Mayyas, A., Hayajneh, M. T., Hassan, A. M. (2011). The Effect of Time, Percent of Copper and Nickel on the Natural Precipitation Hardness of Al – Cu – Ni Powder Metallurgy Alloys Using Design of Experiments. Journal of Minerals and Materials Characterization and Engineering, 10(6), 479-492.

Hamasha, M. M.,  Tashtouth, T. H., Hamasha, S. M., Khasawneh, M. T., "Analysis of Two-Machine Flexible Manufacturing Cell Under Unbalanced Machining Time", Journal of Management and Engineering Integration, Vol. 4, No. 2, pp. 26-31, 2011.

Hasar, U. C. (2011). Unique retrieval of complex permittivity of low-loss dielectric materials from transmission-only measurements. IEEE Geoscience and Remote Sensing Letters 8, (3): 562-564.

Hasar, U.C., and Abusoglu, A. (2011). Using Millimeter and Terahertz Frequencies for Complex Permittivity Retrieval of Low-Loss Materials. Journal of Electromagnetic Waves and Applications, 25(17-18), 2389 – 2398 doi: 10.1163/156939311798806103

Hasar, U. C., and Barroso, J.J. (2011). Retrieval approach for determination of forward and backward wave impedances of bianisotropic metamaterials. Progress in Electromagnetics Research 112: 109-124.

Hasar, U. C., and Barroso, J.J. (2011). Permeability Measurement of Metamaterials with Split-Ring-Resonators Using Free-Space Calibration-Independent Method. Journal of Infrared, Millimeter, and Terahertz Waves, in press, 1-10.

Heine, J. J., Land, W.H. & Egan, K.M. (2011.) Statistical learning techniques applied to epidemiology: A simulated case-control comparison study with logistic regression. BMC Bioinformatics 12.

Homentcovschi, D., and Miles, R.N. (2011). An analytical-numerical method for determining the mechanical response of a condenser microphone. Journal of the Acoustical Society of America, 130(6): 3698-3705. PACS number(s): 43.38.Kb, 43.38.Bs [AJZ]

Homentcovschi, D., and Miles, R.N. (2011). An Operational Approach to the Acoustic Analogy Equations. Acoustic Waves – From Microdevices to Helioseismology, ISBN 978-953-307-572-3, edited by Marco G. Beghi.

Hu, J., Klotzkin, D., Huang, J. S., Sun, X., & Li, N. (2011). Design and device characteristics of index-coupled wafer-level holographically patterned 1.3m quantum dot distributed feedback lasers. Proceedings of SPIE – The International Society for Optical Engineering. Paper presented at the Novel in-Plane Semiconductor Lasers X, 7953. pp. 795309 (7 pp.). doi:10.1117/12.873605

Hu, W., Li, X., Zhang, X., Shi, X., Maybank, S. & Zhang, Z. (2011). Incremental Tensor Subspace Learning and Its Applications to Foreground Segmentation and Tracking. International Journal of Computer Vision, 91 (3) 303-327.

Jang, K., Chung, C., Jang, J., Hong, S., Park, M., Moon, Y., et al. (2011). Green manufacturing process for solder-less PCB assembly using uniform pressure surface interconnector and anisotropic conductive film. Paper presented at the 2011 61st Electronic Components and Technology Conference, ECTC 2011, May 31, 2011 - June 3, pp. 1691-1696. doi:10.1109/ECTC.2011.5898739

Jaradat, Y., Qasaimeh, A., Kondos, P., Arfaei, B., & Borgesen, P. (2011). On the evolution of the properties and microstructure of backward compatible solder joints during cycling and aging. Paper presented at the 2011 61st Electronic Components and Technology Conference, ECTC 2011, May 31, 2011 - June 3, pp. 722-730. doi:10.1109/ECTC.2011.5898593

Kang, K. -D, Zhou, Y. and Oh, J. (2011). Estimating and enhancing real-time data service delays: Control-theoretic approaches. IEEE Transactions on Knowledge and Data Engineering 23, (4): 554-567.

Kapitanova, K., Son, S. H., & Kang, K. (2011). Using fuzzy logic for robust event detection in wireless sensor networks. Ad Hoc Networks, (0) doi:10.1016/j.adhoc.2011.06.008

Kim, D., Larson, J.W. & Chiu, K. (2011). Toward Malleable Model Coupling. Procedia Computer Science, 4 (0), 312-321.

Klir, G. J. (2011). A note on the hartley-like measure of uncertainty. International Journal of General Systems 40, (2): 217-229.

Kodovsky, J., & Fridrich, J. (2011). Steganalysis in high dimensions: Fusing classifiers built on random subspaces. Paper presented at the Media Watermarking, Security, and Forensics III, January 24, 2011 - January 26, 7880. pp. 78800L (13 pp). The Society for Imaging Science and Technology (IS and T); The Society of Photo-Optical Instrumentation Engineers (SPIE). doi:10.1117/12.872279

Kolar, V., Bharath, K., Abu-Ghazaleh, N. B., & Riihijärvi, J. (2011). The effect of contention in CSMA networks: Model and fairness protocol. Performance Evaluation, 68(9), 782-805. doi:10.1016/j.peva.2010.11.003

Kolar, V., Razak, S., Mähönen, P., & Abu-Ghazaleh, N. B. (2011). Link quality analysis and measurement in wireless mesh networks. Ad Hoc Networks, 9(8), 1430-1447. doi:10.1016/j.adhoc.2011.03.005

Land Jr., W.H., Ford, W., Park, J., Mathur, R., Hotchkiss, N., Heine, J., Eschrich, S., Qiao, X. & Yeatman, T. (2011). Partial Least Squares (PLS) Applied to Medical Bioinformatics. Procedia Computer Science, 6 (0) 273-278.

Land Jr., W. H., Qiao, X., Margolis, D., & Gottlieb, R. (2011). A new tool for survival analysis: Evolutionary programming/evolutionary strategies (EP/ES) support vector regression hybrid using both censored / non-censored (event) data. Procedia Computer Science, 6(0), 267-272. doi:10.1016/j.procs.2011.08.050

Li, E., & Craver, S. (2011). A square-root law for active wardens. Paper presented at the 13th ACM Multimedia Security Workshop, MM and Sec'11, September 29, 2011 - September 30, pp. 87-92. doi:10.1145/2037252.2037268

Li, L., & Zhou, G. (2011). 3D KMC simulations of crater growth during the reduction of oxide nanoislands on metal surfaces. Surface Science, 605(1-2), 54-61. doi:10.1016/j.susc.2010.09.021

Li, X., Meng, W., & Yu, C. (2011). T-verifier: Verifying truthfulness of fact statements. Paper presented at the 2011 IEEE 27th International Conference on Data Engineering, ICDE 2011, April 11, 2011 - April 16, pp. 63-74. doi:10.1109/ICDE.2011.5767859

Loew, J., Elwell, J., Ponomarev, D. and Madden, P.H. (2011). Mathematical limits of parallel computation for embedded systems. Proceedings of the Asia and South Pacific Design Automation Conference, ASP-DAC: 653-660.

Loh, O., Wei, X., Ke, C., Sullivan, J., & Espinosa, H. D. (2011). Robust carbon-nanotube-based nano-electromechanical devices: Understanding and eliminating prevalent failure modes using alternative electrode materials. Small, 7(1), 79-86. doi:10.1002/smll.201001166

Lu, J., & Qiu, Q. (2011). Scheduling and mapping of periodic tasks on multi-core embedded systems with energy harvesting. Paper presented at the 2011 International Green Computing Conference, IGCC 2011, July 25, 2011 - July 28, doi:10.1109/IGCC.2011.6008595

Luo, J., Luo, J., Wang, L., Shi, X., Yin, J., Crew, E., Lu, S., Lesperance, L.M., et al. Nanoparticle-structured thin film sensor arrays for breath sensing. Sensors and Actuators B: Chemical, (0) doi:10.1016/j.snb.2011.11.045

Luo, L., Kang, Y., Liu, Z., Yang, J. C., & Zhou, G. (2011). Effect of oxygen pressure on the initial oxidation behavior of cu and cu-au alloys. Paper presented at the 2010 MRS Fall Meeting, November 29, 2010 - December 3, , 1318. pp. 31-36. doi:10.1557/opl.2011.920

Mahajan, S. S., Subbarayan, G., & Sammakia, B. G. (2011). Estimating kapitza resistance between si-SiO(2) interface using molecular dynamics simulations. IEEE Transactions on Components Packaging and Manufacturing Technology, 1(8), 1132-1139. doi:10.1109/TCPMT.2011.2112356

Mandahawi, N., Al-Araidah, O., Boran, A. and Khasawneh, M. (2011). Application of lean six sigma tools to minimise length of stay for ophthalmology day case surgery. International Journal of Six      Sigma and Competitive Advantage 6, (3): 156-172.

Manjeshwar, P. K., Damodaran, P., & Srihari, K. (2011). Genetic algorithms for minimizing makespan in a flow shop with two capacitated batch processing machines. International Journal of Advanced Manufacturing Technology, 55(9-12), 1171-1182. doi:10.1007/s00170-010-3150-0

Margolis, D., Land Jr., W. H., Gottlieb, R., & Qiao, X. (2011). A complex adaptive system using statistical learning theory as an inline preprocess for clinical survival analysis. Procedia Computer Science, 6(0), 279-284. doi:10.1016/j.procs.2011.08.052

Mathur, R., Schaffer, J. D., Land Jr., W. H., Heine, J. J., Eschrich, S., & Yeatman, T. (2011). Evolutionary computation with noise perturbation and cluster analysis to discover biomarker sets. Procedia Computer Science, 6(0), 153-158. doi:10.1016/j.procs.2011.08.030

Meilunas, M., & Borgesen, P. (2011). Effects of cycling parameters on the thermal fatigue life of mixed SnAgCu/SnPb solder joints. Journal of Electronic Packaging, Transactions of the ASME, 133(2) doi:10.1115/1.4003863

Mema, R., Yuan, L., Du, Q., Wang, Y., & Zhou, G. (2011). Effect of surface stresses on CuO nanowire growth in the thermal oxidation of copper. Chemical Physics Letters, 512(1-3), 87-91. doi:10.1016/j.cplett.2011.07.012

Muthuswamy, S., & Lam, S. (2011). Discrete particle swarm optimization for the orienteering problem. International Journal of Industrial Engineering-Theory Applications and Practice, 18(2), 92-102.

Nguyen, T. T., & Park, S. (2011). Characterization of elasto-plastic behavior of actual SAC solder joints for drop test modeling. Microelectronics Reliability, 51(8), 1385-1392. doi:10.1016/j.microrel.2011.03.019

Nguyen, T. T., & Park, S. (2011). Characterization of the mechanical properties of actual solder joints using DIC. Paper presented at the 2011 61st Electronic Components and Technology Conference, ECTC 2011, May 31, 2011 - June 3, pp. 2126-2129. doi:10.1109/ECTC.2011.5898812

Nguyen, T. T., Yu, D., & Park, S. B. (2011). Characterizing the mechanical properties of actual SAC105, SAC305, and SAC405 solder joints by digital image correlation. Journal of Electronic Materials, 40(6), 1409-1415. doi:10.1007/s11664-011-1534-z

Nikulin, V., Malowicki, J., Bedi, V., Hughes, D., & Bloss, H. (2011). Experimental analysis of the effects of atmospheric turbulence on a 29-km free-space laser communication link. Paper presented at the Free-Space Laser Communication Technologies XXIII, 7923. pp. 79230P (7 pp.). doi:10.1117/12.874279

Nikulin, V. V., Khandekar, R., & Bedi, V. (2011). Phase shifting holographic interferometer for precise alignment measurements in packaging applications. Paper presented at the Practical Holography XXV: Materials and Applications, January 23, 2011 - January 26, , 7957. pp. The Society of Photo-Optical Instrumentation Engineers (SPIE). doi:10.1117/12.874282

Nikulin, V., Malowicki, J., Bedi, V., Hughes, D., & Bloss, H. (2011). Experimental analysis of the effects of atmospheric turbulence on a 29-km free-space laser communication link. Paper presented at the Free-Space Laser Communication Technologies XXIII, January 26, 2011 - January 27, 7923. pp. The Society of Photo-Optical Instrumentation Engineers (SPIE). doi:10.1117/12.874279

Omole, M. A., Okello, V. A., Lee, V., Zhou, L., Sadik, O. A., Umbach, C., Sammakia, B. (2011). Catalytic reduction of hexavalent chromium using flexible nanostructured poly(amic acids). ACS Catalysis, 1(2), 139-146. doi:10.1021/cs100034z

Ouakad, H. M., & Younis, M. I. (2011). Natural frequencies and mode shapes of initially curved carbon nanotube resonators under electric excitation. Journal of Sound and Vibration, 330(13), 3182-3195. doi:10.1016/j.jsv.2010.12.029

Pintong, K. P., & Summerville, D. H. (2011). Transitioning a lab-based course to an online format. Paper presented at the 118th ASEE Annual Conference and Exposition, June 26, 2011 - June 29, 2011.

Pisipati, S., Geer, J., Sammakia, B., & Murray, B. T. (2011). A novel alternate approach for multiscale thermal transport using diffusion in the boltzmann transport equation. International Journal of Heat and Mass Transfer, 54(15-16), 3406-3419. doi:10.1016/j.ijheatmasstransfer.2011.03.046

Qasaimeh, A., Jaradat, Y., Wentlent, L., Yang, L., Yin, L., Arfaei, B., et al. (2011). Recrystallization behavior of lead free and lead containing solder in cycling. Paper presented at the 2011 61st Electronic Components and Technology Conference, ECTC 2011, May 31, 2011 - June 3, pp. 1775-1781. doi:10.1109/ECTC.2011.5898753

Qasaimeh, A., Lu, S., & Borgesen, P. (2011). Crack evolution and rapid life assessment for lead free solder joints. Paper presented at the 2011 61st Electronic Components and Technology Conference, ECTC 2011, may 31, 2011 - June 3, pp. 1283-1290. doi:10.1109/ECTC.2011.5898676

Qiu, Q., Wu, Q., Burns, D. J., Moore, M. J., Pino, R. E., Bishop, M., et al. (2011). Confabulation based sentence completion for machine reading. Paper presented at the Symposium Series on Computational Intelligence, IEEE SSCI 2011 - 2011 IEEE Symposium on Computational Intelligence, Cognitive Algorithms, Mind, and Brain, CCMB 2011, April 11, 2011 - April 15, pp. 66-73. doi:10.1109/CCMB.2011.5952109

Qiu, Q., Wu, Q., & Linderman, R. (2011). Unified perception-prediction model for context aware text recognition on a heterogeneous many-core platform. Paper presented at the 2011 International Joint Conference on Neural Network, IJCNN 2011, July 31, 2011 - August 5, pp. 1714-1721. doi:10.1109/IJCNN.2011.6033431

Quan, Z., Luo, Z., Loc, W. S., Zhang, J., Wang, Y., Yang, K., et al. (2011). Synthesis of PbSeTe single ternary alloy and core/shell heterostructured nanocubes. Journal of the American Chemical Society, 133(44), 17590-17593. doi:10.1021/ja207763p

Rajanna, V. S., Jahagirdar, A., Shah, S. and Gopalan, K. (2011). Explicit coordination to prevent congestion in data center networks. Cluster Computing: 1-18.

Ramini, A. H., Younis, M. I., & Miles, R. (2011). Modeling the effects of the PCB motion on the response of microstructures under mechanical shock. Journal of Vibration and Acoustics, Transactions of the ASME, 133(6) doi:10.1115/1.4005219

Reale, M. J., Canavan, S. Yin, L., Hu, K. and Hung T. (2011). A multi-gesture interaction system using a 3-D iris disk model for gaze estimation and an active appearance model for 3-D hand pointing. IEEE Transactions on Multimedia 13, (3): 474-486.

Roggeman, B. D., Raghavan, V., & Borgesen, P. (2011). Joint level test methods for solder pad cratering investigations. Journal of Electronic Packaging, Transactions of the ASME, 133(3) doi:10.1115/1.4004182

Sasturkar, A., Yang, P., Stoller, S. D., & Ramakrishnan, C. R. (2011). Policy analysis for administrative role-based access control. Theoretical Computer Science, 412(44), 6208-6234. doi:10.1016/j.tcs.2011.05.009

Sayama, H. (2011). An artificial life view of the collatz problem. Artificial Life, 17(2), 137-140. doi:10.1162/artl_c_00024

Sayama, H., Farrell, D.L. & Dionne, S.D. (2011). The Effects of Mental Model Formation on Group Decision Making: An Agent-Based Simulation. Complexity, vol. 16, no. 3, pp. 49-57.

Schoeller, H., Bansal, S., Knobloch, A., Shaddock, D., & Cho, J. (2011). Effect of alloying elements on the creep behavior of high pb-based solders. Materials Science and Engineering: A, 528(3), 1063-1070. doi:10.1016/j.msea.2010.10.083

Seversky, L. M., Berger, M.S. and Yin, L. (2011). Harmonic point cloud orientation. Computers and Graphics (Pergamon).

Shan, S., Yoon, S. W., Khasawneh, M. T., & Gandhi, T. (2011). A decision support system for estimating short-term hospital inpatient demands. Paper presented at the 8th International Conference on Service Systems and Service Management, ICSSSM'11, June 25, 2011 - June 27, pp. IEEE Systems, Man and Cybernetics Society; Tsinghua University, Research Center for Contemporary Management; The Chinese University of Hong Kong; Nankai University. doi:10.1109/ICSSSM.2011.5959514

Shen, H., & Qiu, Q. (2011). An FPGA-based distributed computing system with power and thermal management capabilities. Paper presented at the 2011 20th International Conference on Computer Communications and Networks, ICCCN 2011, July 31, 2011 - August 4, pp. IEEE Communications Society; U.S. National Science Foundation (NSF); Qualcomm; Microsoft Research; EiC. doi:10.1109/ICCCN.2011.6005802

Shen, L., Ratterman, M., Klotzkin, D., & Papautsky, I. (2011). Use of a low-cost CMOS detector and cross-polarization signal isolation for oxygen sensing. IEEE Sensors Journal, 11(6), 1359-1360. doi:10.1109/JSEN.2010.2089048

Shen, L., Ratterman, M., Klotzkin, D., & Papautsky, I. (2011). A CMOS optical detection system for point-of-use luminescent oxygen sensing. Sensors and Actuators B: Chemical, 155(1), 430-435. doi:10.1016/j.snb.2011.01.001

Shu, L., Chen, A., Xiong, M., & Meng, W. (2011). Efficient spectral neighborhood blocking for entity resolution. Paper presented at the 2011 IEEE 27th International Conference on Data Engineering, ICDE 2011, April 11, 2011 - April 16, pp. 1067-1078. doi:10.1109/ICDE.2011.5767835

Steinmann, A., Wu, N.E., Su, Q.T., Miles, R.N. (2011). Sigma-Delta Control of a Biased and Initially-Displaced MEMS Microphone. Proceedings of the 18th IFAC World Congress 2011; 28 Aug - 02 Sep 2011; 18(1); 3545-3550; Milan, IT.

Stoller, S. D., Yang, P., Gofman, M. I., & Ramakrishnan, C. R. (2011). Symbolic reachability analysis for parameterized administrative role-based access control. Computers & Security, 30(2–3), 148-164. doi:10.1016/j.cose.2010.08.002

Su, Z., Zhang, Z., Chen, Y., Ning, Z., & Li, Y. (2011). A novel algorithm for image contents distribution over image contents networks based on efficient caching solutions. Information-an International Interdisciplinary Journal, 14(6), 2061-2069.

Suzer, M. H., Kang, K., & Basaran, C. Active queue management via event-driven feedback control. Computer Communications, (0) doi:10.1016/j.comcom.2011.12.001

Thankalekshmi, R. R., Dixit, S., Rastogi, A. C., Samanta, K., & Katiyar, R. S. (2011). Closed-space flux sublimation growth and properties of (cu-mn)-doped ZnO films in nanoneedle-like morphologies. Integrated Ferroelectrics, 125, 130-140. doi:10.1080/10584587.2011.574470

Venkatadri, V., Raghavan, V. A., Kesavakumaran, V., Lam, S. S., & Srihari, K. (2011). Simulation based alternatives for overall process improvement at the cardiac catheterization lab. Simulation Modelling Practice and Theory, 19(7), 1544-1557. doi:10.1016/j.simpat.2011.04.004

Venkatadri, V., Sammakia, B., Srihari, K., & Santos, D. (2011). A review of recent advances in thermal management in three dimensional chip stacks in electronic systems. Journal of Electronic Packaging, Transactions of the ASME, 133(4) doi:10.1115/1.4005298

Wafula, F., Liu, Y., Yin, L., Borgesen, P., Cotts, E. J., & Dimitrov, N. (2011). Effect of the deposition parameters on the voiding propensity of solder joints with cu electroplated in a hull cell. Journal of Applied Electrochemistry, 41(4), 469-480. doi:10.1007/s10800-011-0257-4

Wagoner, S., Cui, W., Jones, W. E., Klotzkin, D., Meyers, G., & White Jr., B. E. (2011). Experimental modules introducing microfabrication utilizing a multidisciplinary approach. Paper presented at the 118th ASEE Annual Conference and Exposition, June 26, 2011 - June 29, 2011.

Wang, D., Belharouak, I., Koenig, G. M., Zhou, G., & Amine, K. (2011). Growth mechanism of Ni0.3Mn0.7CO3 precursor for high capacity li-ion battery cathodes. Journal of Materials Chemistry, 21(25), 9290-9295. doi:10.1039/c1jm11077b

Wu, N. E., Ruschmann, M. C., Huang, J., & Huang, K. (2011). Probing the NASA generic transport aircraft in real-time for health monitoring. IEEE Transactions on Control Systems Technology, 19(5), 1288-1295. doi:10.1109/TCST.2010.2067215

Wu, N. E., & Ruschmann, M. C. (2011). FTC of hidden markov process with application to resource allocation in air operation. Journal of Systems Engineering and Electronics, 22(1), 12-21. doi:10.3969/j.issn.1004-4132.2011.01.002

Xu, Z., Niu, Y., Wang, Z., Li, H., Yang, L., Qiu, J., Wang, H. (2011). Enhanced nucleation rate of polylactide in composites assisted by surface acid oxidized carbon nanotubes of different aspect ratios. ACS Applied Materials and Interfaces, 3(9), 3744-3753. doi:10.1021/am200932q

Xu, Z., & Lu, S. (2011). Multi-objective optimization of sensor array using genetic algorithm. Sensors and Actuators, B: Chemical, 160(1), 278-286. doi:10.1016/j.snb.2011.07.048

Yang, K., Xu, C., Huang, L., Zou, L., & Wang, H. (2011). Hybrid nanostructure heterojunction solar cells fabricated using vertically aligned ZnO nanotubes grown on reduced graphene oxide. Nanotechnology, 22(40) doi:10.1088/0957-4484/22/40/405401

Yin, L., Wafula, F., Dimitrov, N., & Borgesen, P. (2011). Toward a better understanding of the effect of cu electroplating process parameters on Cu3Sn voiding., 1-11. doi:10.1007/s11664-011-1764-0

Yin, L., Wentlent, L., Yang, L., Arfaei, B., Oasaimeh, A., & Borgesen, P. (2011). Recrystallization and precipitate coarsening in pb-free solder joints during thermomechanical fatigue., 1-12. doi:10.1007/s11664-011-1762-2

Yin, L., & Borgesen, P. (2011). On the root cause of kirkendall voiding in Cu3Sn. Journal of Materials Research, 26(3), 455-466. doi:10.1557/jmr.2010.47

Yoon, S. W., & Nof, S. Y. (2011). Affiliation/dissociation decision models in demand and capacity sharing collaborative network. International Journal of Production Economics, 130(2), 135-143. doi:10.1016/j.ijpe.2010.10.002

Yoon, S. W., & Nof, S. Y. (2011). Cooperative production switchover coordination for the real-time order acceptance decision. International Journal of Production Research, 49(6), 1813-1826. doi:10.1080/00207540903567325

Yu, D., Al-Yafawi, A., Nguyen, T. T., Park, S., & Chung, S. (2011). High-cycle fatigue life prediction for pb-free BGA under random vibration loading. Microelectronics Reliability, 51(3), 649-656. doi:10.1016/j.microrel.2010.10.003

Yu, J., Craver, S., & Li, E. (2011). Toward the identification of DSLR lenses by chromatic aberration. Paper presented at the Media Watermarking, Security, and Forensics III, January 24, 2011 - January 26, 7880. pp. The Society for Imaging Science and Technology (IS and T); The Society of Photo-Optical Instrumentation Engineers (SPIE). doi:10.1117/12.872681

Yu, S., Lee, J. S., Nozaki, S., & Cho, J. Microstructure developments of F-doped SiO2 thin films prepared by liquid phase deposition. Thin Solid Films, (0) doi:10.1016/j.tsf.2011.08.039

Yuan, L., Wang, Y., Mema, R., & Zhou, G. (2011). Driving force and growth mechanism for spontaneous oxide nanowire formation during the thermal oxidation of metals. Acta Materialia, 59(6), 2491-2500. doi:10.1016/j.actamat.2010.12.052

Zahorian, S., Summerville, D. H., Craver, S., & Elmore, M. (2011). ACTS - an ABET compliance tracking system for assessing engineering outcomes. Paper presented at the 118th ASEE Annual Conference and Exposition, June 26, 2011 - June 29, 2011.

Zhang, H., Poliks, M. D., Sammakia, B., Garner, S., Miller, J., & Lyon, J. (2011). Micron-sized feature overlay alignment on large flexible substrates for electronic and display systems. Journal of Display Technology, 7(6), 330-338. doi:10.1109/JDT.2010.2060312

Zheng, M., Chen, X., Bae, I. T., Ke, C., Park, C., Smith, M. W., et al. (2011). Radial mechanical properties of single-walled boron nitride nanotubes. Small (Weinheim an Der Bergstrasse, Germany), doi:10.1002/smll.201100946; 10.1002/smll.201100946

Zheng, M., & Ke, C. (2011). Mechanical deformation of carbon nanotube nano-rings on flat substrate. Journal of Applied Physics. 109. (7) doi:10.1063/1.3554406

Zhi, M., Zhou, G., Hong, Z., Wang, J., Gemmen, R., Gerdes, K., et al. (2011). Single crystalline la(0.5)sr(0.5)MnO(3) microcubes as cathode of solid oxide fuel cell RID A-6866-2010. Energy & Environmental Science, 4(1), 139-144. doi:10.1039/c0ee00300j

Last Updated: 11/26/13